We Have The Best Solutions for Your Business
Regis Heat sink Technology Co., Ltd. is a professional manufacturer of heat dissipation processing. Regis's products and services include various heat sinks, structural parts, heat dissipation analysis and heat dissipation scheme design. Our products are widely used in telecommunications, aerospace, automotive, industrial control, power electronics, medical equipment, security electronics, LED lighting and multimedia/consumer fields.
CPU water cooler with low noise
Liquid cooling tends to produce less sound as small pumps are usually well insulated and radiator fans tend to run at lower RPM (revolutions per minute) than on CPU coolers
How CPU Water Cooler Works
The process starts with the backplane, which is connected to the CPU's IHS with a layer of thermal paste. This allows for better heat transfer between the two surfaces. The metal surface of the base plate is part of the water block, designed to fill with coolant.
The coolant absorbs heat from the baseplate as it passes through the water block. It then continues through the system and travels up to the radiator through one of the two tubes. The radiator exposes the liquid to the air, which helps it cool, and then a fan attached to the radiator removes the heat from the cooler. The coolant then re-enters the water block and the cycle begins again.
The function of circulating water cooler
The function of the circulating water cooler is to take away the heat generated by the instrument through relatively low temperature water, so as to keep the temperature of the instrument part at a lower level.
CPU water cooler
Installation of liquid coolers is usually more complicated than standard air coolers, but it is still fairly simple. Most consist of just a water block, two hoses that circulate coolant, and a radiator. Additional steps include installing a water block, a process similar to installing an air cooler, and then attaching the heatsink and fan in such a way that excess heat can easily leave the PC. Since the coolant, pump and radiator are separate in the unit, little supervision or maintenance is required after installation.
Frequently Asked Question
Do you have any question?
Water cooling type includes tubular type and corrugated plate type ①Tubular type a. The cooling water flows through the tube, the oil flows between the tubes, the middle folded plate makes the oil deflect, and the two-way or four-way flow mode is adopted to strengthen the cooling effect, and the heat dissipation effect is good. The heat dissipation series can reach 350 ~ 580W /(m2·℃). b. There are mainly fixed folding plate type, floating head type, double tube type, U-shaped tube type, vertical type, horizontal type, etc. ②Corrugated plate type a. The contact points formed by the superimposed arrangement of the plate-type herringbone or oblique corrugated structure make the liquid flow form turbulent flow under the condition of low flow velocity, improve the heat dissipation effect, and the heat dissipation effect is good, and the heat dissipation coefficient can reach 230 ~ 815W/(m2· °C). b. There are mainly character corrugated, oblique corrugated and so on.
Coolers often use water or air as the coolant to remove heat.
Electricity consumption per liter of water temperature. In the case of the same volume, the smaller the value, the better.
Liquid cooling "distributes heat over more convective surface area (heat sink) more efficiently than pure conduction, resulting in lower fan speeds (better acoustics) or higher total power." In other words, it's more efficient , and generally quieter.