Regis Heat sink Technology Co., Ltd. is a professional manufacturer of heat dissipation processing. Regis's products and services include various heat sinks, structural parts, heat dissipation analysis and heat dissipation scheme design. Our products are widely used in telecommunications, aerospace, automotive, industrial control, power electronics, medical equipment, security electronics, LED lighting and multimedia/consumer fields.
The density of aluminum shell processing is only 2.7g/cm3, which is about 1/3 of the density of steel, copper or brass (7.83g/cm3, 8.93g/cm3, respectively). Aluminum exhibits excellent corrosion resistance under most environmental conditions, including in air, water (or brine), petrochemicals, and many chemical systems.
Aluminum housing machining is often chosen due to its excellent electrical conductivity. On an equal weight basis, aluminum has nearly twice the electrical conductivity of copper.
Aluminium profiles are non-ferromagnetic, an important property for the electrical and electronic industries. Aluminium profiles are not self-igniting, which is important for applications involving handling or contact with flammable and explosive materials.
The machinability of the aluminum case processing is excellent. In various wrought and cast aluminum alloys, and in the various states in which these alloys are produced, the machining characteristics vary considerably, which requires special machine tools or techniques.
The complexity of the cavity lies in what the material is used for. It is also determined according to the accessories that can be compatible with it. As for the mechanical strength involved, there are also considerations in this regard. It is nothing more than an increase in the material wall thickness and an extra side of the reinforcing rib.
The formation of shrinkage cavities is due to the destruction of the directional sequential solidification of the aluminum alloy liquid, and the solid phase surrounds a small part of the liquid phase, so that the surrounding area cannot get enough aluminum to supplement the alloy liquid.
Aluminum also has an extremely low thermal emissivity. Excellent thermal properties such as these make aluminum an excellent vacuum material. The surface properties of aluminium allow the aluminium vacuum chamber to be fully baked at 150oC.