1) Product structure inspection: The mechanical dimension of the liquid cooled heat sink is inspected by the height gauge and CMM equipment to ensure that it meets your requirements.
2) Heat dissipation performance test: Test the thermal resistance and pressure drop performance of the liquid cooled heat sink through a thermal resistance tester to ensure that it meets your requirements.
3) Air tightness test: Fill the closed liquid cooled heat sink with air pressure, and then put it into water to observe whether there are bubbles emerging from the liquid cooled heat sink. If there are bubbles, it is a defective product. This is the most basic reliability of the liquid cooled heat sink Testing, and also the most important reliability test, requires 100% inspection.
4) Internal inspection of the flow channel: Check whether there are aluminum chips, dirt, impurities, etc. in the flow channel of the liquid cooled heat sink through industrial endoscopy, so as not to damage the water pump impeller and cause the coolant to conduct electricity and damage the equipment.
|Material of the cooling plate||Stainless steel（SUS304、SUS316、SUS316L）
|Product maximum size||customize|
|final processing||Degreasing, anodizing, powder spraying, oil spraying, baking paint, electroplating, passivation|
|maximum working pressure||2-20bar|
|Coolant||Ethylene glycol solution, propylene glycol solution, pure water|
|Coolant temperature difference between inlet and outlet||0.5-8.5℃|
|Inlet and outlet pressure drop||10-500mbar|
|surface temperature rise||5-20℃|
|cooling power consumption||0.05-50KW|
Please make sure your contact information is correct. Your message willbe sent directly to the recipient(s) and will notbe publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.